Huacam HCV207 Manuel d'utilisateur télécharger pdf (Page 19)

www.huacam.com 19

• Dynamically Associated via DHCP: Default setting, DHCP server assign IP to

camera.

•

Statically Configured as: Static IP address configuration

 DNS Configuration: DNS server IP, must be configured correctly if using static IP.



HTTP: Web access TCP port, default 80.

NOTE:

 If camera behind SOHO router with port forwarding configuration for remote access, static IP

or static DHCP has to be used to avoid IP address change after router reboot.

 TCP port above 5000 suggested if port forwarding HTTP remote access, due to some ISP

would block port 80 inbound traffic. For example, change the default HTTP port from 80 to

8088, to make sure the port forwarding not likely be blocked.

 In addition to HTTP port, RTSP port also required to be configured for port forwarding, in

order for remote party viewing the H.264 video.

 If change the default port from TCP 80 to port “A”, then RTSP port should be “2000+A”. Both

TCP port “A” and “2000+A” should be configured for port forwarding in the router. For

example, the HTTP port changed to 8088, the RTSP port should be 10088, both 8088 and

10088 should be configured for port forwarding in order for remote camera video access.

4.4. DDNS Settings Page

This page allows user to configure dynamic DNS related parameters:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Pas de commentaire

Huacam HCV207 Manuel d'utilisateur Page 19